HAWLE – E2 VALVE

Design Features

  • Resilient seated gate valve according to EN 1171, EN 1074-1 and EN 1074-2 with
  • smooth straight-thought bore
  • Wedge guide with high glide characteristics; load optimized design guarantees lowest wear and minimum closing torques
  • Wedge nut allows high torque load through large dimensioning of the required thread length
  • O-rings, lip seals mounted in rust-proof material on all sides as well as up to DN 200 under pressure (according to ISO 7259), from DN 250 can be replaced in depressurized state
  • Edge protection ring protects during transport and storage
  • Friction washers (DN 50 to DN200) and roller bearings (DN 250 to DN 600) guarantee low friction mounting of the spindle
  • 100% suitable for underground installation
  • All cast iron parts are epoxy-powder coated, according to quality mark RAL 662, GSK

  KOJBVC

  • It can be operated manually or by electric actuator
  • The E2 gate valve is our top product which requires the lowest operating torque
  • Wedge guides made of POM guarantee lowest wear and lowest closing torques
  • The spindle O-rings can be replaced under full operating pressure in the dimensions DN 50- DN 200. In larger dimensions the spindle is seated on ball bearings to reduce the operating torque.
  • the edge protection ring protects against damages of the coating during transport and storage.

HAWLE E2 COMBIThis one compact designed unit replaces multiple products. A flanged tee piece with three or four flanged outlets and three or four integral E2 Elypso valves.

 

 

HAWLE E2 COMBI III FLANGE ENDSFlanged Tee Piece with 3 flanged outlets and 3 integral E2 Elypso Valves.

HAWLE E2 COMBI IVFlanged tee piece with 4 integral E2 valves